lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Module Communications Network|Page 3493 > < Module Communications Network|Page 3491
Page 10
background image

Normal Operation

The LCM communicates with the diagnostic tool through the standard corporate protocol (SCP) communications network, circuits 914 (TN/OG) and
915 (PK/LB). Check the SCP circuits between the LCM C2145a and the data link connector (DLC) C251. The total resistance values must not be
more than 5 ohms. If the resistance is more than 5 ohms, there is an open circuit in the SCP network, damage to the DLC C251, or damage to the
LCM C2145a.

Possible Causes

-

SCP data plus circuit 914 (TN/OG) open

-

SCP data minus circuit 915 (PK/LB) open

-

LCM C2145a

-

LCM

Test E: The Driver Door Module (DDM) Does Not Respond To The Diagnostic Tool

PINPOINT TEST E: THE DRIVER DOOR MODULE (DDM) DOES NOT RESPOND TO THE DIAGNOSTIC TOOL

Module Communications Network|Page 3493 > < Module Communications Network|Page 3491