lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Module Communications Network|Page 3494 > < Module Communications Network|Page 3492
Page 11
background image

E1-E3

Normal Operation

The DDM communicates with the diagnostic tool through the standard corporate protocol (SCP) communications network, circuits 914 (TN/OG) and
915 (PK/LB). Check the SCP circuits between the DDM C501a and the data link connector (DLC) C251. The total resistance values must not be more
than 5 ohms. If the resistance is more than 5 ohms, there is an open circuit in the SCP network, damage to the DLC C251, or damage to the DDM
C501a.

Possible Causes

-

SCP data plus circuit 914 (TN/OG) open

Module Communications Network|Page 3494 > < Module Communications Network|Page 3492