Town Car V8-4.6L VIN V Flex Fuel (2006)
6. Remove the nut and detach the wiring harness clips.
-
To install, tighten to 9 Nm (80 lb-in).
7. NOTE: It is not necessary to remove the A/C compressor bolts.
Loosen the 3 A/C compressor bolts enough to slide the compressor down one inch, allowing access for CKP sensor removal.
-
To install, tighten to 25 Nm (18 lb-ft).
8. Remove the bolt and the CKP sensor.
-
To install, tighten to 10 Nm (89 lb-in).
9. To install, reverse the removal procedure.
