Town Car V8-4.6L VIN V Flex Fuel (2006)
Evaporative System Service Port: Service and Repair
EVAPORATIVE EMISSION TEST PORT
Removal and Installation
1. Disconnect the evaporative emission (EVAP) test port quick connect coupling at the EVAP canister purge valve.
2. Disconnect the EVAP test port quick connect coupling at the EVAP vapor tube and remove the EVAP test port.
3. To install, reverse the removal procedure.
-
Leak test the system. See: Testing and Inspection/Evaporative Emission System Leak Test
-
Carry out the Evaporative Emission Repair Verification Drive Cycle. See: Testing and Inspection/Evaporative Emission Repair Verification
Drive Cycle
