Town Car V8-4.6L VIN V Flex Fuel (2006)
8. CAUTION: The dogpoint screw has a blunt end and must be used.
Remove the screw.
-
To install, tighten to 5 Nm (44 lb-in).
9. Position a suitable lifting device under the fuel tank.
10. NOTE: Discard old retaining nuts. Do not reuse.
Remove the fuel tank strap retaining nuts and position the straps away from the fuel tank.
-
To install, tighten to 35 Nm (26 lb-ft).
11. Partially lower the fuel tank to allow fuel tank filler pipe removal.
12. Remove the fuel tank filler pipe assembly.
-
Rotate the fuel tank filler pipe counterclockwise 1/2 turn and remove from the fuel tank.
13. Remove the fuel tank filler pipe grommet and discard.
-
Upon installation, coat with petroleum jelly.
14. To install, reverse the removal procedure.