Town Car V8-4.6L VIN V Flex Fuel (2006)
Air Bag Control Module: Service and Repair
RESTRAINTS CONTROL MODULE (RCM)
Removal
WARNING:
-
Always wear safety glasses when repairing an air bag supplemental restraint system (SRS) vehicle and when handling an air bag module.
This will reduce the risk of injury in the event of an accidental deployment.
-
The restraints control module (RCM) orientation is critical for proper supplemental restraint system (SRS) operation. If a vehicle
equipped with a SRS system has been involved in a collision in which the center tunnel area has been damaged, inspect the mounting and
bracket for deformation. If damaged, the RCM must be replaced whether or not the air bags have deployed. In addition, make sure the
area of the RCM mounting is restored to its original condition.
-
To reduce the risk of personal injury, do not use any memory saver devices.
-
The tightening torque of the air bag restraints control module (RCM) retaining bolts is critical for correct system operation.
CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage can result.
NOTE:
-
The air bag warning lamp illuminates when the RCM fuse is removed and the ignition switch is ON. This is normal operation and does not indicate
a supplemental restraint system (SRS) fault.
-
The SRS must be fully operational and free of faults before releasing the vehicle to the customer.
-
Repair is made by installing a new part only. If the new part does not correct the condition, install the original part and perform the diagnostic
procedure again.
1. Depower the system.
