Town Car V8-4.6L VIN V Flex Fuel (2006)
Power Steering Pump: Service and Repair
Pulley
Power Steering Pump Pulley
Special Tool(s)
Removal and Installation
CAUTION: Installation of a new power steering pump pulley is necessary after being removed and installed 2 times.
Inspect the pulley for paint marks in the web area near the hub. If there are 2 paint marks, discard the pulley. If there is no paint or one paint mark, use
a paint pencil to mark the web area of the pulley near the hub.
1. WARNING: The electrical power to the air suspension system must be turned off prior to hoisting, jacking or towing an air suspension
vehicle. Failure to do so can result in unexpected inflation or deflation of the air springs, which can result in shifting of the vehicle during
these operations.
Turn the air suspension service switch to the OFF position.
2. Remove the drive belt.
3. With the vehicle in NEUTRAL, position it on a hoist.
