Town Car V8-4.6L VIN V Flex Fuel (2006)
Using the special tool, remove the inner tie rod.
9. CAUTION: Thoroughly remove any abrasive material. This material is extremely harmful to the steering gear.
CAUTION: Make sure that the bellows boot is not twisted.
CAUTION: Lubricate the inner tie-rod inner groove with grease where the bellows boot seal is clamped. Make sure that the bellows boot seal is
positioned correctly over the steering gear housing bead at the large inside diameter (ID) and is in the inner tie-rod groove at the small ID.
To install, reverse the removal procedure.
^
Thoroughly clean and inspect all the parts to be reused. Install new parts as necessary.
10. Check and, if necessary, align the front end.
11. Turn the air suspension service switch to the ON position.
