Town Car V8-4.6L VIN V Flex Fuel (2006)
1
Tighten the rear bolt.
-
Tighten to 103 Nm (76 lb-ft).
2
Tighten the front bolt.
-
Tighten to 103 Nm (76 lb-ft).
3
Tighten the nuts.
-
Tighten to 200 Nm (148 lb-ft).
6. Install the 3 LH lower control arm and 3 RH lower control arm rear mounting bolts.
-
Tighten to 90 Nm (66 lb-ft).
7. Position the brake line into the retaining clips at the rear of the number 2 crossmember.
8. Install the LH and RH ABS harness.
1
Install the 2 harness retainers into the frame.
2
Install the 2 brackets and bolts.
3
Install the 2 ABS harnesses into the support brackets.
9. Position the LH and RH brake calipers and install the 4 bolts.
-
Tighten to 32 Nm (24 lb-ft).
10. Position the LH and RH brake hose and brackets and install the 2 bolts.
