Town Car V8-4.6L VIN V Flex Fuel (2006)
Mount and mark the shock absorber and spring assembly.
1
Position the Shock absorber and spring assembly in a suitable holding device.
2
Mark the upper mounting bracket, spring and Shock absorber for assembly reference.
4. NOTE: If installing a new spring, make sure the part number is correct. Refer to the vehicle certification (VC) label for the correct spring code.
Compress the spring.
1
Install an appropriate spring compressor.
2
Compress the spring.
5. While holding the Shock absorber rod, remove and discard the nut.
6. Remove the mounting bracket and dust boot as an assembly.
