Town Car V8-4.6L VIN V Flex Fuel (2006)
Remove the bolts and position the brake caliper aside.
^
Support the caliper and anchor plate assembly using mechanic's wire.
^
To install, tighten to 27 Nm (20 ft. lbs.)
4. Remove the spring and the actuator from the rear parking brake shoes.
5. Using the special tool, press the wheel stud from its seat.
6. Rotate the flange so that the tip of the wheel stud is pointing upwards and remove the wheel stud.
^
Discard the wheel stud.
Installation
CAUTION: Never use air tools to install wheel studs. The serrations can be stripped from the stud.
1. Insert a new wheel stud in the hole in the axle flange, making sure the serrations are aligned with those made by the original wheel stud.
