Town Car V8-4.6L VIN V Flex Fuel (2006)
5. Remove the nut retaining the tube routing bracket to the A/C compressor.
^
To install, tighten to 9 Nm (80 inch lbs.).
6. Disconnect each fluid cooler tube from the transmission, as necessary.
^
To install, tighten to 20 Nm (15 ft. lbs.).
7. Disconnect the fluid cooler hose(s) from the fluid cooler tube(s).
8. Remove the bolt retaining the line routing bracket to the engine and remove the transmission fluid cooler tube(s).
^
To install, tighten to 15 Nm (11 ft. lbs.).
9. To install, reverse the removal procedure.
^
Fill the transmission to the correct level with clean automatic transmission fluid. Inspect for leaks.
