Town Car V8-4.6L VIN V Flex Fuel (2006)
4. Pull down evenly and remove the transmission fluid filter and seal.
5. Clean and inspect the transmission fluid pan, transmission fluid pan gasket and the magnet.
Installation
1. CAUTION: If installing a new filter and the seal remains in the main control bore, carefully use a small screwdriver to remove the seal. Use care
not to damage the main control bore.
NOTE: If transmission is being serviced for a contamination-related failure, use a new filter and seal. The filter may be reused if no excessive
contamination is present.
Install a new fluid filter and seal as required.
2. Position the pan magnet into the transmission fluid pan.
3. NOTE: The transmission fluid pan gasket is reusable, clean and inspect for damage, if not damaged, the gasket should be reused.
