lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Manual Control Lever Shaft and Seal|Page 4961 > < Manual Control Lever Shaft and Seal|Page 4959
Page 3
background image

7. Pull down evenly and remove the transmission fluid filter and seal.

8. Clean and inspect the transmission fluid pan, transmission fluid pan gasket and the magnet.

9. Remove the manual control valve detent lever bolt and spring.

10. NOTE:  Use a shop cloth to protect the transmission case surface.

Remove the manual lever shaft retaining pin.

Manual Control Lever Shaft and Seal|Page 4961 > < Manual Control Lever Shaft and Seal|Page 4959