Town Car V8-4.6L VIN V Flex Fuel (2006)
3. Install the manual valve detent lever spring and bolt.
^
Tighten to 10 Nm (89 inch lbs.).
4. CAUTION: If installing a new filter and the seal remains in the main control bore, carefully use a small screwdriver to remove the seal. Use care
not to damage the main control bore.
NOTE: If transmission is being serviced for a contamination-related failure, use a new filter and seal. The filter may be reused if no excessive
contamination is present.
Install a new fluid filter and seal as required.
5. Position the pan magnet into the transmission fluid pan.
6. NOTE: The transmission fluid pan gasket is reusable, clean and inspect for damage, if not damaged, the gasket should be reused.
