lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Manual Control Lever Shaft and Seal|Page 4965 > < Manual Control Lever Shaft and Seal|Page 4963
Page 7
background image

10. With the manual lever in overdrive, connect the shift control cable.

^

Tighten to 23 Nm (17 ft. lbs.). 

11. Connect the digital TR sensor electrical connector.

12. NOTE:  Start by filling the transmission with 4.7 liters (5 quarts) of clean automatic transmission fluid.

Fill the transmission to the correct fluid level, using clean automatic transmission fluid.

Manual Control Lever Shaft and Seal|Page 4965 > < Manual Control Lever Shaft and Seal|Page 4963