lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Manual Control Lever Shaft and Seal|Page 4971 > < Manual Control Lever Shaft and Seal|Page 4969
Page 6
background image

12. Remove the bolts from the LH exhaust flange.

13. Remove the 2 bolts and the LH catalytic converter.
14. Install a suitable transmission Jack.

15. Remove the RH side crossmember bolts.

16. Disconnect the LH side crossmember.

1

Loosen but do not remove the LH side crossmember bolts.

2

Remove the LH side crossmember bolt.

Manual Control Lever Shaft and Seal|Page 4971 > < Manual Control Lever Shaft and Seal|Page 4969