Town Car V8-4.6L VIN V Flex Fuel (2006)
7. Install the parking brake cable bracket.
^
Tighten to 55 Nm (41 ft. lbs.).
8. Lower the transmission onto the crossmember and install the rear transmission insulator nuts.
^
Tighten to 80 Nm (59 ft. lbs.).
9. Remove the transmission Jack.
10. Install a new gasket and position the RH catalytic converter assembly in place and loosely install the bolts. Do not tighten the bolts at this time.
11. Install the RH exhaust flange nuts.
^
Tighten to 40 Nm (30 ft. lbs.).
