lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Shift Cable, A/T > < Selector Shaft, A/T|Service and Repair|Page 5186
Page 7
background image

10. With the manual lever in overdrive, connect the shift control cable.

^

Tighten to 23 Nm (17 ft. lbs.). 

11. Connect the digital TR sensor electrical connector.

12. NOTE:  Start by filling the transmission with 4.7 liters (5 quarts) of clean automatic transmission fluid.

Fill the transmission to the correct fluid level, using clean automatic transmission fluid.

Shift Cable, A/T > < Selector Shaft, A/T|Service and Repair|Page 5186