lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Shift Solenoid, A/T > < Shift Interlock Solenoid|Service and Repair
Page 2
background image

To deplete the backup power supply energy, disconnect the battery ground cable and wait at least one minute. Be sure to disconnect auxiliary
batteries and power supplies (if equipped). 

Disconnect the battery ground cable. Wait at least one minute before proceeding with the procedure to allow the backup power supply to deplete
its energy. 

2. Remove the supplemental restraint system (SRS) steering column clockspring. 

3. Remove the 3 bolts and remove the coil mounting bracket from the steering column.

^

To install, tighten to 8 Nm (71 inch lbs.). 

4. Release the clip retaining the shift lock actuator and slide the actuator down.

5. Remove the park position switch from the cavity and remove the actuator assembly.
6. To install, reverse the removal procedure.

Shift Solenoid, A/T > < Shift Interlock Solenoid|Service and Repair