Town Car V8-4.6L VIN W (1997)
Rear Door Panel: Service and Repair
Door Trim Panel, Rear
REMOVAL
1. Snap out two door pull strap retaining screw covers and remove screws.
2. Remove one screw on rear side of rear door trim panel.
3. Using the trim pad removing tool from Rotunda Windshield and Moulding/Trim kit 107-R0401 or equivalent, pry trim panel retaining clips from
rear door inner panel.
4. Move rear door trim panel forward to slip cup off inside release handle, then rotate rear door trim panel to remove vertical lock rod.
5. Disconnect any electrical connections (if equipped) from switches at rear door trim panel.
INSTALLATION
1. Follow removal procedure in reverse order.
2. Use two guide pins to align clips during installation.
