Town Car V8-4.6L VIN W (1997)
Keyless Entry Transmitter Battery: Service and Repair
REMOVAL
1. Twist a thin coin between the two halves of the keyless entry remote transmitter.
CAUTION: Do not take the front half of the transmitter apart.
2. Carefully remove the old batteries.
INSTALLATION
1. Install new batteries positive (+) side down as marked.
NOTE: The keyless entry remote transmitter is powered by two coin-type, three-volt lithium batteries.
2. Carefully swing the contacts back onto the top of the batteries.
3. Snap the two halves of the transmitter back together.
