Town Car V8-4.6L VIN W (1997)
Sunroof / Moonroof Weatherstrip: Service and Repair
REMOVAL
1. Remove roof sliding outer glass panel.
2. Remove old roof sliding panel seal.
3. Remove weatherstrip adhesive from roof sliding outer glass panel channel.
INSTALLATION
1. Trim one end of the new roof sliding panel seal square. Trim other end of roof sliding panel seal with minimal 1.0 mm (0.039 Inch) interference
with opposite square end.
2. Apply Super Weatherstrip Adhesive 3M(R) 08008 or equivalent to new roof sliding panel seal and press roof sliding panel seal onto roof sliding
outer glass panel.
NOTE: Locate butt joint of roof sliding panel seal on passenger side of roof sliding outer glass panel first to make sure that bumper insert in roof
sliding panel seal is positioned along front of roof sliding outer glass panel.
3. Install roof sliding outer glass panel.
4. Adjust roof sliding outer glass panel.
