Town Car V8-4.6L VIN W (1997)
Wheel Speed Sensor: Service and Repair
Toothed Ring
Rear
REMOVAL
1. Remove axle shaft and position on a work bench.
2. Using a thin-blade cold chisel between rear brake anti-lock sensor indicator and axle shaft, strike chisel evenly around flange forcing rear brake
anti-lock sensor indicator off rear brake anti-lock sensor indicator journal.
3. Discard rear brake anti-lock sensor indicator.
CAUTION: Use only a cold chisel, not a screwdriver. Extreme care should be taken not to scratch or nick rear wheel bearing and seal journal and
rear brake anti-lock sensor indicator journal.
NOTE: Prior to installation of new rear brake anti-lock sensor indicator, remove any burrs or nicks from journal.
INSTALLATION
1. Position Sensing Ring Replacer T94P-20202-A on Axle Bearing/Seal Plate T75L-1165-B, placed on press bed as shown.
