Town Car V8-4.6L VIN W (1997)
16. Remove LH lower instrument panel retaining bolts.
NOTE: Pull and retain the instrument panel rearward slightly by installing a small block of wood or similar tool between the instrument panel and
the body.
17. Remove parking brake control retaining bolts.
18. Lower parking brake control. Disconnect the front parking brake cable and conduit from parking brake control reel.
19. Remove parking brake release handle from parking brake control by snapping the two release handle bushings out of the parking brake control
release lever.
INSTALLATION
1. Attach parking brake release handle to parking brake control by snapping two parking brake handle bushings into parking brake control release
lever.
2. Position parking brake control and connect front parking brake cable and conduit.
3. Install parking brake control-to-body side cowl and install three retaining bolts. Tighten to 25-35 Nm (19-25 ft. lbs.).