Town Car V8-4.6L VIN W (1997)
13. Attach parking brake release handle to instrument panel steering column cover by inserting handle locator tab through the cover's locating hole,
sliding the parking brake release handle forward. Install parking brake release handle mounting screw. Tighten to 1-2 Nm (9-17 inch lbs.).
NOTE: If the release handle locator tab is not fed through the column cover locating hole, the parking brake release handle will not fit properly to
the instrument panel steering column cover.
14. Raise vehicle. Connect front parking brake cable and conduit to parking brake rear cable and conduit.
15. Adjust parking brake cable tension.
16. Lower vehicle and connect battery ground cable.
17. Check operation of parking brake control.
