Town Car V8-4.6L VIN W (1997)
Fig. 25 Crankshaft To Camshaft Timing
6. Install LH timing chain on camshaft sprocket. Make sure copper link of timing chain lines up with timing mark of camshaft sprocket.
7. Install LH timing chain on crankshaft sprocket. Make sure copper link of timing chain lines up with timing mark of crankshaft sprocket.
8. If removed, install RH crankshaft sprocket with tapered part of crankshaft sprocket facing TOWARD cylinder block (6010).
9. Install RH timing chain on camshaft sprocket. Make sure copper link of timing chain lines up with timing mark of camshaft sprocket.
10. Install RH timing chain on crankshaft sprocket. Make sure copper link of timing chain lines up with timing mark of crankshaft sprocket.
11. Compress and lock RH and LH timing chain tensioners.
12. Install and secure with two bolts on each. Tighten bolts to 20-30 Nm (15-22 ft. lbs.).
13. Install Crankshaft Holding Tool T93P-6303-A over crankshaft and engine front cover alignment dowel, to position crankshaft.
