lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Crankshaft Gear/Sprocket|Page 2794 > < Crankshaft Gear/Sprocket|Page 2792
Page 1
background image

Crankshaft Gear/Sprocket: Service Precautions

CAUTION: 

Camshaft Sprockets 

The camshaft sprockets (6256) should only be disassembled from the camshafts when one of the components is to be replaced.

Interference Type Engine 

This is NOT a free-wheeling engine, if it has jumped time, there will be damage to the valves and pistons (6108) and will require the removal
of the cylinder heads.

Main Bearing Caps 

To maintain proper main bearing bore alignment, all main bearing caps must be loosened and tightened as a unit. DO NOT loosen, remove,
install and tighten one cap at a time.

Valve/Piston Damage 

At no time, when the timing chain(s) are removed and the cylinder heads (6049) are installed, may the crankshaft (6303) and camshafts (6250)
be rotated. Failure to follow these directions will result in valve and/or piston damage.

Crankshaft Gear/Sprocket|Page 2794 > < Crankshaft Gear/Sprocket|Page 2792