Town Car V8-4.6L VIN W (1997)
Control Assembly: Service and Repair
Control Assembly, HVAC
REMOVAL
1. Remove battery ground cable.
2. Pull instrument panel moulding away from instrument panel far enough to remove electrical connectors. Remove instrument panel moulding.
NOTE: The instrument panel moulding is retained by snap-in tabs.
3. Remove four screws from the A/C control and pull the control out of the instrument panel.
4. Remove the two electrical connectors and the vacuum hose harness from the A/C control.
INSTALLATION
1. Connect the two electrical connectors and the vacuum hose harness to the A/C control.
2. Position the A/C control in the instrument panel and secure with four screws.
3. Install the instrument panel moulding by snapping in the bottom.
4. Connect battery ground cable.
