Town Car V8-4.6L VIN W (1997)
Control Assembly: Service and Repair
Climate Control Assembly Bulbs
REMOVAL
1. Remove A/C control.
2. Place A/C control module upside-down on non-marring surface.
3. Use a screwdriver to unsnap bezel and pivot open.
4. For illumination bulb, unscrew old bulb and screw in new bulb. For hi/lo bulb, pull bulb from clip and cut wires close to base of bulb. Splice wires
to new bulb and individually wrap with electrical tape. Insert new bulb into clip. Carefully resnap bezel to housing.
INSTALLATION
1. Follow removal procedure in reverse order.
