Town Car V8-4.6L VIN W (1997)
Glove Box Lamp: Service and Repair
REMOVAL
The glove compartment lamp switch and wire is mounted above the glove compartment. The glove compartment lamp switch and wire also
functions as the lock striker.
1. Disconnect wiring.
2. Remove one screw retaining glove compartment lamp switch and wire to instrument panel.
INSTALLATION
1. To install, place interior lamp in position, install retaining screw and tighten screw to 2-3 Nm (18-26 Lb-In).
2. Adjust glove compartment door latch to striker position.
3. To replace miniature bulb, pull out with thumb and finger. Install new miniature bulb by pressing into socket.
