lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Wheels and Tires|Service and Repair > < Pinpoint Tests|Page 2037
Page 2
background image

During the road test, drive the vehicle on a road that is smooth and free of undulations. If vibration is apparent, note and record the following:
^

the speed at which the vibration occurs

^

what type of vibration occurs in each speed range

^

mechanical (such as shake) or audible (such as tire whine)

^

how the vibration is affected by changes in vehicle speed, engine speed and engine torque

^

type of vibration sensitivity-torque sensitive, vehicle speed sensitive or engine speed sensitive

If the road test indicates the vibration is related to the tires or wheels, refer to Pinpoint Test F. If the road test indicates there is tire whine, but no shake
or vibration, the noise originates with the contact between the tire and the road surface.
^

A thumping noise usually means the tire has flat or soft spots making a noise as they slap the roadway. Tire whine can be distinguished from axle
noise axle noise diminishes or changes according to load or speed while tire noise remains the same over a range of speeds.

^

To verify that tire noise is not associated with shake or vibration, inflate the tires one at a time and check for a change in the sound. The pitch or
whine will change as the increased pressure changes the tire frequency.

^

Be sure to deflate tires to their proper pressures after this check is completed.

Use the following explanation of terms to help isolate the source of the vibration.
Torque Sensitive

The condition can be improved or worsened by accelerating, decelerating, coasting, maintaining a steady vehicle speed and application of engine
torque.

Vehicle Speed Sensitive

The vibration always occurs at the same vehicle speed and is not affected by engine torque, engine speed or transmission Gear selection.

Engine Speed Sensitive

The vibration occurs at varying vehicle speeds when a different gear is selected. It can sometimes be isolated by increasing or decreasing engine
speed with the transmission in NEUTRAL, or by stall testing with the transmission in gear. If the condition is engine-speed sensitive, the condition
is not related to tires.

Wheels and Tires|Service and Repair > < Pinpoint Tests|Page 2037