lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Multiplex Communication Network <--> [Information Bus]|Flow of Diagnosis|Page 3774 > < Multiplex Communication Network <--> [Information Bus]|Flow of Diagnosis|Page 3772
Page 1
background image

Multiplex Communication Network: Service and Repair

NOTE:  If either Circuit 914 or Circuit 915 is repaired or replaced without following proper repair procedures, the operation of the J 1850
communication Network will be degraded.

Circuit 914 and Circuit 915 must be twisted at a rate of 33-40 twists per 1.0 meter (3.3 feet) anytime replacement of either circuit is required. The twist
must be within 10 centimeters (4.9 inches) of any connector termination point.

The conductor for Circuit 914 and Circuit 915 must be No.20 AWG wire.

Multiplex Communication Network <--> [Information Bus]|Flow of Diagnosis|Page 3774 > < Multiplex Communication Network <--> [Information Bus]|Flow of Diagnosis|Page 3772