Town Car V8-4.6L VIN W (1997)
Throttle Cable/Linkage: Service and Repair
Accelerator Cable
REMOVAL and INSTALLATION
1. Using a suitable tool, push the accelerator cable nylon bushing out of the accelerator pedal and shaft arm.
2. Remove the accelerator cable retainer from the accelerator cable housing. The accelerator cable retainer is located inside the vehicle where the
accelerator cable housing passes through the dash panel into the passenger compartment.
3. Disconnect the accelerator cable at the throttle body lever by rotating the throttle lever to the Wide Open Throttle (WOT) position and slide cable
through slot in the throttle body lever cam.
4. Remove the accelerator cable housing to accelerator cable bracket retaining screw.