Town Car V8-4.6L VIN W (1997)
INSTALLATION
1. Whenever an ignition wire is removed for any reason from a spark plug or ignition coil or a new ignition wire is installed, coat the entire interior
surface of the boots with Silicone Brake Caliper Grease and Dielectric Compound D7AZ-19A331-A (Motorcraft WA-10) or equivalent meeting
Ford specification ESE-M1C171-A using a small clean tool prior to installation.
CAUTION: Proper installation of ignition wires is critical to vehicle operation. If any ignition wire is not properly installed on spark plug or