Town Car V8-4.6L VIN W (1997)
Power Seat Switch: Service and Repair
Power 6-Way Seat Regulator Control Switch
REMOVAL
1. Disconnect battery ground cable.
2. Gently pry upon front of window regulator switch plate.
3. Unhook rear edge of window regulator switch plate and remove window regulator control switch from front door trim panel.
4. Remove two screws retaining harness connector to window regulator switch housing.
5. Carefully pry seat regulator control switch from harness connector with a small screwdriver. Take care not to damage connector pins.
INSTALLATION
1. To install, position seat regulator control switch to harness connector and carefully press into place.
2. Follow removal procedure in reverse order.
