Town Car V8-4.6L VIN W (1997)
Sunroof / Moonroof Switch: Service and Repair
REMOVAL
1. Remove roof console.
2. Disconnect wiring connector on side of roof console.
3. Carefully spread center walls of roof console to release center circuit plate and expose roof sliding panel switch.
4. Remove wiring assembly connector by releasing connector retaining tab on side wall of roof console with a flat-bladed screwdriver and sliding
connector off its locating finger.
5. Using a small screwdriver, pry apart the two switch retaining tabs and remove switch assembly.
INSTALLATION
1. Connect electrical connector to roof sliding panel switch.
2. Snap roof sliding panel switch securely into roof console.
NOTE: The roof sliding panel switch is "keyed" and can only be installed one way.
3. Install roof console.
