Town Car V8-4.6L VIN W (1997)
Brake Switch (Cruise Control): Service and Repair
Deactivator Switch
REMOVAL
1. Disconnect electrical connector from deactivator switch.
2. Unscrew deactivator switch and remove from brake pressure control valve (vehicles with anti-lock brakes) or brake pressure switch adapter
(vehicles with conventional hydraulic brakes).
INSTALLATION
1. Screw deactivator switch into brake pressure control valve or brake pressure switch adapter. Tighten to 15-20 Nm (11-15 Lb-Ft).
2. Connect electrical connector.
3. Bleed brake lines.
