lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Suspension Control Module|Locations|Page 7211 > < Suspension Control Module|Locations|Page 7209
Page 2
background image

occupants and luggage are removed from the vehicle.

^

When the ignition switch is turned to RUN, Circuit 295 (LB/BK) is supplied B+.

^

If there is an open in Circuit 1053 (LB/PK) or in its feed circuits, the control module will be inoperative and diagnostics cannot be entered.

Door Courtesy Lamp Switch Input 
System responds to lamp switch as follows:
^

The control module uses the door courtesy lamp switch input for two different functions:
-

preventing vents when a door is open to avoid the possibility of the vehicle lowering and the door catching on an obstruction.

-

servicing a correction immediately, if needed.

^

The control module cannot sense which doors are open, only that one or more doors are open, or all doors are closed.

^

If a damaged door lamp switch (always open) or a short to battery in Circuit 344 (BK/Y) exists, the control module will interpret that a door is
open and not vent unless vehicle speed is above 24 km/h (15 mph).
-

Above 24 km/h (15 mph) the control module disregards all door signals.

Suspension Control Module|Locations|Page 7211 > < Suspension Control Module|Locations|Page 7209