Town Car V8-4.6L VIN W (1997)
3. Install the power steering gear input shaft bearing with the metal side that covers the rollers facing outward. Seat the power steering gear input
shaft bearing using Input Shaft Bearing/Seal Tool T65P-3524-A. Make sure power steering gear input shaft bearing rotates freely.
4. Dip a new power steering gear input shaft seal in Power Steering Fluid Motorcraft MARCON ATF.
5. Place the snap ring in the housing and drive the snap ring until ring seats in its groove.
6. Apply a liberal coating of multipurpose Grease DOAZ-19584-AA or equivalent meeting Ford specifications ESB-M1C93-A and ESR-M1C159-A
to the area between the two seals.
7. Place the power steering gear input shaft seal in the housing with the rubber side facing out. Drive the power steering gear input shaft seal so it sits
behind the undercut in the power steering gear input shaft and control.
