Town Car V8-4.6L VIN W (1997)
Stabilizer Bushing: Service and Repair
Front
REMOVAL
1. Raise vehicle on hoist.
2. Remove four stabilizer bar bracket nuts and two stabilizer bar brackets.
3. Remove lower suspension arm stabilizer bar insulators from front stabilizer bars.
INSTALLATION
1. Clean front stabilizer bar of dirt and other contamination. Position lower suspension arm stabilizer bar insulator on front stabilizer bar.
2. Install stabilizer bar bracket and four stabilizer bar bracket retaining nuts. Tighten nuts to 26-35 Nm (19-26 ft. lbs.).