Town Car V8-4.6L VIN W (1997)
Air Line: Service and Repair
Air Line Joint
If a gross leak is detected in any of the quick connect fittings, it can be serviced using an air spring connector repair kit containing a new O-ring, collet,
release ring and O-ring removal tool. The outer housing of the fitting cannot be serviced. Minor air seepage is acceptable.
To remove the collet and O-ring, insert a scrap piece of air line, grasp the air line firmly (do not use pliers) and pull straight out. (DO NOT use the
release button.) A force of 130-220 N (30-50 lbs) is required to remove the collet. After the collet is removed, use the service tool to remove the old
O-ring.
Part 1 Of 2
Part 2 Of 2
To service, first make sure the seal area is free of dirt. Insert the new O-ring and seat it in the bottom of the fitting housing. Insert the new collet,
verifying the end with four prongs is inserted. Press the collet into position with finger pressure. Install the new release button.