lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Compressor/Pump, Suspension Control|Service and Repair > < Compressor/Pump, Suspension Control|Specifications|Page 7565
Page 1
background image

Compressor/Pump: Description and Operation

NOTE:  

^

The compressor motor contains a thermal overload circuit breaker. The circuit breaker automatically resets if tripped by excessive heat.

^

The compressor air drier may be serviced separately.

The air compressor assembly:

^

consists of the compressor and vent solenoid; neither is serviceable.

^

is mounted in the engine compartment on the LH fender apron below the engine air cleaner (ACL). 

^

is a single-cylinder electric motor-driven unit which provides pressurized air as required.

^

is powered by a relay, controlled by the control module.
passes pressurized air through the compressor air drier which contains silica gel (a drying agent).

^

moisture is then removed from the compressor air drier when vented air passes out of the system during vent operation.

Compressor/Pump, Suspension Control|Service and Repair > < Compressor/Pump, Suspension Control|Specifications|Page 7565