Town Car V8-4.6L VIN W (1997)
10. Install main control valve body.
11. Install fluid filter and grommet.
12. Clean, inspect and install pan-to-case gasket and transmission pan. Tighten all bolts to 12-15 Nm (9-11 ft. lbs.).
NOTE: Transmission pan-to-case gasket is reuseable if not damaged.
13. Install transmission shift linkage to manual control lever
14. Pour 4.7 liters (5 quarts) of Motorcraft MERCON Multi-Purpose (ATF) Transmission Fluid XT-2-QDX or equivalent MERCON approved fluid
into fluid filler tube. MERCON(R) automatic Transmission Fluid is being replaced by MERCON(R) V as a service fluid, as per TSB 06-14-4.
15. Reconnect battery ground cable.
16. Start the engine and add specified fluid as required to achieve the proper fluid level.
17. Check the transmission for leaks.
