Town Car V8-4.6L VIN W (1997)
7. Grasp connector at each solenoid or sensor and pull straight out to disconnect.
CAUTION: Do not pull on wires. This may damage wires or connector and could result in a transmission concern. If required, carefully pry up
on locking tab and disconnect the connector.
8. Remove one bolt retaining manual control valve detent lever spring to the main control valve body.
9. Remove electronic pressure control (EPC) solenoid bracket retaining bolt. Remove bracket.
10. Remove remaining 24 valve body-to-case retaining bolts, the main control valve body and the valve-to-body gasket.
