Town Car V8-4.6L VIN W (1997)
4. While holding rear axle universal joint flange with Companion Flange Holding Tool T78P-4851-A, remove Pinion nut.
5. Clean area around the rear axle drive pinion seal. Place a drain pan under rear axle drive pinion seal or raise front of vehicle higher than rear.
6. Mark rear axle universal joint flange in relation to pinion shaft so rear axle universal joint flange can be installed in same position.
7. Remove rear axle universal joint flange using Companion Flange Remover T65L-4851-B.
CAUTION: To prevent damage to the rear axle universal joint flange or drive pinion bearing adjustment shim, never strike the rear axle universal
joint flange with a hammer.
