Town Car V8-4.6L VIN W (1997)
Companion Flange: Testing and Inspection
Runout Check
1. Raise the vehicle on a hoist that supports the rear axle (twin post hoist).
2. Remove the driveshaft assembly.
3. Inspect the rear axle universal joint flange for damage.
4. Position Companion Flange Runout Gauge T92L-4851-B on rear axle universal joint flange.
5. Install Clamp Plate T92L-4851-C on runout gauge.
6. Align holes in clamp plate with holes in rear axle universal joint flange and install bolts. Snug bolts evenly.
