Town Car V8-4.6L VIN W (1997)
Windshield: Service and Repair
REMOVAL
1. Remove windshield wiper arms and blades.
WARNING: SAFETY GLASSES AND GLOVES MUST BE WORN.
2. Remove inside rear view mirror.
3. Remove visors and drop headliner near windshield opening down to avoid cutting headliner during windshield removal. Place a small block of
suitable material between headliner and roof to act as a spacer. Remove windshield side garnish moulding as required.
4. Remove cowl vent screen.
5. Remove front door weatherstrip from vehicle.
6. Use Rotunda Knife With Offset Blade 107-R1511 or Rotunda Interior Auto Glass Cut-Out Knife Kit 164-R2450 or equivalent to cut adhesive.
CAUTION: Use care to avoid damage to the instrument panel.
7. Remove windshield and moulding assemblies from vehicle using suitable suction tool.
8. Trim remaining urethane on pinch weld to within 1 and 1.5 mm (0.04 and 0.06 inch) thickness with utility knife or razor blade. When completed,
surface should be smooth and free of cuts and contamination.
9. Check pinch weld sealing area for damaged sheet metal, rust or foreign objects which may have caused, or may cause, glass breakage. Service
metal if necessary.
