Town Car V8-4.6L VIN W (1997)
Windshield Washer Switch: Description and Operation
DESCRIPTION
The multi-function switch, which is mounted to the steering column lock cylinder housing, provides electrical switching for the following:
^
turn signal
^
headlamp dimmer
^
headlamp flash-to-pass
^
hazard warning
^
cornering lamps
^
windshield washer/wiper
OPERATION
The windshield washer switch, located at the end of the turn signal lever, operates as follows:
^
The ignition switch lock cylinder must be in RUN position to operate washer.
^
Push the end of the turn signal lever in toward the center of the steering actuator housing to actuate the washer.
^
Release the turn signal lever to turn off the washer.
^
The windshield wipers will continue to operate briefly and then automatically return to the previous wiper speed setting (OFF, LO, HI or INT).
^
Washer operation is available in all positions of wiper operation.