Zephyr V6-3.0L VIN 1 (2006)
4
Press the programmed universal transmitter button for as long as the universal transmitter red indicator flashes (1-2 seconds). Release the
button and re-press the button to confirm that the universal transmitter is trained to the receiver.
5
The garage door opener should recognize the universal transmitter.
Erasing Channels
1. NOTE: Individual channels cannot be erased, but can be reprogrammed using the procedures for programming.
To erase all 3 programmed channels, hold down the 2 outside buttons until the red indicator begins to flash (20-30 seconds). Release both buttons.